Rechargeable Light Ring Accessory for our 3x, 6x or 10x Loupes
PLEASE NOTE: Before using your Light Ring, make sure that you have fully read the Loupe System Light Ring Accessory Usage and Installation Instructions (click here to access them).
The Loupe System Light Ring accessory can be mounted on all our loupes (6x Model 01, 3x Model 02, or 10x Model 03), simply by replacing the loupe's current middle ring and bottom rubber element.
The Light Ring, which is covered in 3K weave matte carbon fiber, provides three different user-selectable light settings for the loupe:
Light mode 1: 4,000K neutral white light only (adjustable from 5% to 100% intensity).
Light mode 2: 4,000K neutral white light (adjustable from 5% to 100% intensity) plus 365-370um UV light (always at 100% intensity).
Light mode 3: 365-370um UV light only (adjustable from 5% to 100% intensity).
The Light Ring contains two custom-molded single-cell Lithium Polymer (LiPo) rechargeable batteries, each connected to its own dedicated charge/discharge circuit. These batteries are charged using one of the two supplied USB cables, which should be plugged into any USB wall charger, computer port or power bank.
The Light Ring accessory comes packaged in a waterproof and air-tight shipping case, designed to protect it during storage and shipment. The shipping case is also designed to have its inner foam element removed, so that it can be used as safe waterproof storage for electronics and other delicate items while boating or going to the beach.
The following items are packed together in each shipping case:
The light ring itself, with its matte carbon fiber outer shell already mounted on it.
Both a short (60cm / 2ft) and a long (3m / 10ft) USB charging cable.
A transparent silicone bottom element for your loupe.
A UV light warning label.
A thank you card pointing you to the installation and usage instructions (click here to read them).